Tubing Connectors and Fittings
Ace Glass, Inc. Valve, adapter, 0-4mm Hi-Vac, (2) no.15 O-ring joints, No-Air
Valve, adapter, 0-4mm Hi-Vac, (2) no.15 O-ring joints, No-Air
Ace Glass, Inc. Union, polypropylene, 1/2 to 1/2in compression fit, 3/8inoriface
Union, polypropylene, 1/2 to 1/2in compression fit, 3/8inoriface
BURKLE INC Sampling spoon curved, l.h., 0.34 oz. (10 ml),PS,white,sterile
The spoon with curved spoon bowl is suitable for a wide range of different media including powders, granulates, pastes and liquids. The angled spoon shape is also good for reaching into the corners of a container. The long handle of the plastic spoon makes it possible to empty residue from large containers easily and can also reach into places that are hard to reach such as jerrycans with narrow necks.
Chemglass Life Sciences Adapter, Connecting, 14/20 Joints, 90mm Between Joints, Straight
Adapter, Connecting, 14/20 Joints, 90mm Between Joints, Straight. Used to expand the length of apparatus. Adapter can also be used as an air condenser. With standard taper top outer and lower inner joint.
Chemglass Life Sciences 55/50 Outer Joint, Full Length, on 60mm OD x 2.4mm W tubing
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint. 55/50 Outer Joint, Full Length, on 60mm OD x 2.4mm W tubing.
Chemglass Life Sciences 19/38 Side Seal Joints, Sidearm OD: 10.0mm, Hole Size: 4mm
19/38 Side Seal Joints, Sidearm OD: 10.0mm, Hole Size: 4mm. Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hole drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper position.The 19/38 sizes are compatible with Buchi Rotary Evaporators. Part number CG-132-02 has a single sidearm and a drip tip permitting the seal to be made for the PTFE feed tube.
Chemglass Life Sciences Adapter, Vacuum Filtration, 38mm ID Flange, #4 Pluro Stopper, 29/42 Lower Vacuum Assembly, Overall Height 230mm
Adapter, Vacuum Filtration, 38mm ID Flange, #4 Pluro Stopper, 29/42 Lower Vacuum Assembly, Overall Height 230mm. Adapter used for reduced pressure filtration with plain stem Buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.
Chemglass Life Sciences Adapter, Inert Gas, 24/40 Inner Joint
Adapter, Inert Gas, 24/40 Inner Joint. Adapter has two hose connections 180º from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.
Chemglass Life Sciences Adapter, Distillation, Claisen, 24/40 Joint Size, 10/30 Thermometer Joint For 75mm Immersion, 198mm H x 200mm W
Adapter, Distillation, Claisen, 24/40 Joint Size, 10/30 Thermometer Joint For 75mm Immersion, 198mm H x 200mm W. Distilling adapter having an outer member on the vertical side tube for use with a thermometer of the listed joint size and immersion. Sidearm has a standard taper inner drip tip joint while vertical tube has a top outer and lower inner joint, all being the same size. FOR THERMOMETERS SEE CG-3506-N.
Chemglass Life Sciences Adapter, Inlet, 29/42 Inner Joint, 95mm Height
Adapter, Inlet, 29/42 Inner Joint, 95mm Height. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has an O.D. of 10mm at the largest serration.
Chemglass Life Sciences Adapter, Inlet, 24/40 Inner Joint, 86mm Height
Adapter, Inlet, 24/40 Inner Joint, 86mm Height. Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has an O.D. of 10mm at the largest serration.
Chemglass Life Sciences 19/38 Side Seal Joints, Sidearm OD: 10.0mm (2), Hole Size: 4mm
19/38 Side Seal Joints, Sidearm OD: 10.0mm (2), Hole Size: 4mm. Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hole drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper position. The 19/38 sizes are compatible with Buchi Rotary Evaporators. Part number CG-132-03 has two sidearms sealed 180º apart and is used for replacement on the vertical cold trap condenser assembly.